Monday, June 21, 2010

GRUNDFOS CR - Multistage Pumps : Features and Benefits




The Complete CR Range - Grundfos Multistage Pumps :

  • 4 different material versions: CR, CRI, CRN and CRT
  • 10 different sizes: 1s, 1, 3, 5, 10, 15, 20, 32, 45, 64 and 90
  • Motor range from 0.37 to 45 kW (CRE from 0.37 to 22 kW)
  • Temperature range from -40 to 180 °C

CR Basic Features :

  • Shaft seal solutions: A wide choice of materials in the cartridge configuration
  • Motor: Grundfos MG & MGE
  • Cartridge shaft seal: Grundfos developedand produced 
  • Material options:CR/CRI/CRN/CRT
  • Connections: A broad range of connections 
  • Dry-running sensor: Grundfos LiqTec 
  • Bearings:  Hard wearing materials 
  • High performance hydraulics: Grundfos state-of-the-art hydraulic design and production technology

CR High Pressure :
  • CRNE 1HS & CRNE 3HS up to 5600 rpm with MGE motor technology
  • Larger pumps in two-pump solution

GRUNDFOS CR - Multistage Pumps : Features and Benefits





The Complete CR Range - Grundfos Multistage Pumps

  • 4 different material versions: CR, CRI, CRN and CRT
  • 10 different sizes: 1s, 1, 3, 5, 10, 15, 20, 32, 45, 64 and 90
  • Motor range from 0.37 to 45 kW (CRE from 0.37 to 22 kW)
  • Temperature range from -40 to 180 °C










Shaft seal solutions: A wide choice of materials in the cartridge configuration

Motor:
Grundfos MG & MGE

Cartridge shaft seal:
Grundfos developed and produced

Material options:
CR/CRI/CRN/CRT

Connections:
A broad range  of connections

Dry-running sensor:
Grundfos LiqTec

Bearings:
Hard wearing materials

High performance hydraulics:
Grundfos state-of-the-art hydraulic
design and production technology


  • CRNE 1HS & CRNE 3HS up to 5600 rpm with MGE motor technology
  • Larger pumps in two-pump solution

Friday, June 18, 2010

Why Speed Cntrolled Pumps ?






What are the general benefits by speed controlling pumps  ?

Energy Saving
  • Reduced Life Cycle Cost and reduced CO2 emission
Increased  Comfort
  • Reduced noise from th installation,
  • Constant pressure
  • No water hammering
Make Processes Work
• adapts automatically to changes in system Reduced total system cost
• speed controlled pumps can make some valves etc. unnecessary
• reduced installation and commissioning costs

Protection of Pump, Motor and Electronic
• reduced stress on motor, pump and system
• overload protection of motor and electronic

An example:
• A speed controlled pump automatically adapt  the pump performance to the actual need.
• The flow is reduced by lowering the speed of the pump
• The pressure is constant 3 bar

Saturday, May 1, 2010

GRUNDFOS : Speed-Controlled Pumps





Grundfos pumps cover a broad range of applications and an even wider variety of configurations. From single-stage to multistage; dry-pit as well as submerged pumps; from clean water to sewage - in cast iron, composite, stainless steel and even titanium, each pump is developed to perform under specific conditions.

We are one of the world’s few pump manufacturers who are responsible for developing and producing every single element of their pumps and associated technology. Electronic components such as control units, frequency converters, motors and sensors are all developed in-house to achieve perfect product and system integration.

This wide range and built in cross-compatibility of components allows us to provide solutions for every application – usually without the need for custom-built solutions and the subsequent cost.


Saturday, March 20, 2010

Low Maintenance Costs for Grundfos SP





 The customer benefit that drives down your Cost of Ownership
part-2

5.Durability with Stainless Steel

  • Standard version for drinking water
  • N-version for slightly aggressive saline water
  • R-version for sea water
  • Zinc anode protection for sea water and in harbours
  • Recycling










6. Unique bearing system

  • Replaceable bearings and neck rings
  • Unique octagonally shaped bearings with high velocity sand flush channels reduce abrasive wear
  • Viton version for oil
  • Hard rubber version for sand




7.Priming Screw
  • Uniquely designed screw and impeller for priming the pump
  • Protection against dry-running








8. Long Service Intervals
  • Maximum resistance against corrosion and abrasion
  • Advanced design and construction
  • Best materials chosen
  • Pump and motor protection feature

Friday, March 19, 2010

Gundfos Submersible Pump SP : Low Maintenance Costs




Gundfos Submersible Pump SP : Low Maintenance Costs - part 1
The customer benefit that drives down your Cost of Ownership

1. Water Lubricated Bearings
  • SP ensures low purification costs
  • No contamination risk from materials
  • SP protects the water quality
  Durability with stainless steel
Standard version for drinking water
N-version for slightly aggressive saline water
R-version for sea water
Zinc anode protection for sea water and in harbours
Recycling


2. Maintenance-Friendly Design
  • Quick and cost effective service
  • Smooth surface - cleaning is often sufficient
  • Replace only rubber wear parts
  • Low weight






3. Sealed Top Bearings 


  •  High resistance against sand and other abrasive particles
  • Trouble free operation
  • Extended operation period







4.Replaceable Wear Rings


Replace wear parts at service and thus maintain the best pump effenciency








to be contiued ...part2

Saturday, March 13, 2010

Grundfos Submersible Pump : SP Series - part 1






The Grundfos SP Product Range :
  • Wide and complete range
  • The only complete range of all stainlesssteel submersibles
  •  50 Hz and 60 Hz versions












The Customer Benefit that Drives Down Your Cost of Ownership
1.High pump efficiency :
  • Reduced energy consumption
  • High effenciency is more important than the purchase price
  • Example: Water capacity: 400 m³/h Head: 80 m. Operation time: 12 h/day, 10 years Energy price: USD 0.075 per kWh. Approx. saving by converting to a pump with 10% higher effenciency: 800,000 kWh, corresponding to USD 60,000
2.Reduced impeller diameters : 
  • Specific duty points
  •  Motor size match
  •  We recommend:  
    • Use full-size impellers
    • Change flow/operation hours




to be continued.... part 2

Thursday, March 11, 2010

Grundfos Pressure Boosting : What’s NEW in Booster system Controls ??




 
We put the Brain into the control !! 


Wednesday, March 10, 2010

Grundfos Pressure Boosting : Purpose

 Series : 2

Grundfos Pressure Boosting














  • Adjust speed i.e. performance to varying demand
  • Energy savings
  • Laws of affinity
  • Controlled ramp-up and ramp-down of pumps
  • Soft start
  • Lenient on pipe net

Affinity law; example reduce speed 25 %
75 % speed = 75 % flow
75 % speed = 56 % Head
75 % speed = 42 % Energy

Grundfos Pressure Boosting  Grundfos Booster Pump

Tuesday, March 9, 2010

Grundfos : Pressure Boosting

Serie :1
Purpose of pressure booster system :

1.Adapt performance to variations in demand
  • Maintain a constant pressure, level or temperature
  • Smooth and controlled performance ramp up and down
  • Stop pumps at zero flow
  • Avoid unnecessary energy consumption, wear and heating up the water
  • Secure optimum comfort level
2.Secure back-up capacity
  • Pump failure                                                  
3. Not enough capacity with only one pump

    Example:Consumption profile Office building 24 hours :













to be contiued : Serie : 2


Monday, March 8, 2010

ALDOS Dosing Pump >> DDI 222

ALDOS Dosing Pump >>  DDI 222

  • Digital dosing up to 150 l/h with direct input of the dosing rate
  • Drastic reduction of variants and spare parts: 1 motor, 1 gear and 2 dosing head sizes are sufficient for the complete series
  • Pump overpressure control:  digital input of the maximal backpressure allowed, if it is exceeded, the pump shuts down
  • Easy dosing of high viscous media 
Diagram Capacity

DDI 222 Series with Flow Monitor
The unique digital dosing control

Dosing malfunctions are immediately detected and registered, even in very small dosing flows
Control of the system excess pressure on the pressure side: just input the maximum backpressure allowed in the dosing head, if this pressure is exceeded, the pump shuts down.

The average pressure in the dosing head is continuously measured and can be easily queried at the touch of a button.

GRUNDFOS CHJ : Multistage Jet Pump

One of the most popular Multistage Jet Pump with the Impeller Stainless Steel is Grundfos CHJ.
For details Click Here



Grundfos Domestic Pump CHJ JD Basic

Domestic Pump : Grundfos JD Basic

 Domestic Pump : Grundfos JD Basic
 
For more information about these pumps please click here




Grundfos JD Basic